33VX-1700 Series (EXP Version) Service Manual
BEEP TONE
This parameter sets the Beep Tone (frequency).
The available selections are “LOW,” “NORMAL,”
and “HIGH.”
BEEP AF SET
This parameter defines whether the Beep volume
is linked to the front panel’s VOL knob (“LINK”)
or not linked (“FIX”).
BEEP VOL
This parameter sets the Beep volume level.
To program the Beep volume level, double click
the left mouse button on this column, enter de-
sired Beep volume level from the keyboard, then
press the [ENTER] key to accept the Beep volume
level.
When the “BEEP AF SET” parameter is set to
“FIX,” the available selections are “0” to “100.”
When the “BEEP AF SET” parameter is set to
“LINK,” the available selections are “-100” to
“100.”
DUAL WATCH MODE
This parameter defines the priority channel for
the dual watch feature. The channels currently
programmed into the radio will appear in the
drop-down list.
LOCK MODE
This parameter selects from among the available
function locking schemes.
The available selections are “CH,” “KEYPAD,”
and “ALL.”
SCAN RESUME
This parameter selects the Scan Resume Mode.
The available selections are “Carrier” and “Tim-
er.”
STANDBY BEEP
This parameter toggles the Standby Beep feature
“ON” or “OFF.”
When this parameter is set to “ON,” an “Alarm”
beep will be heard and transmitted when the PTT
switch is released.
VOX GAIN
This parameter sets the gain of the VOX circuit.
To program the VOX gain, double click the left
mouse button on this column, enter desired VOX
gain from the keyboard, then press the [ENTER]
key to accept the VOX gain.
The available values are “0” to “100.”
VOX DELAY
This parameter sets the VOX delay time.
To program the VOX delay time, double click the
left mouse button on this column, enter desired VOX
delay time from the keyboard, then press the [EN-
TER] key to accept the VOX delay time.
The available values are “100 mSec” to “3000
mSec” (100 mSec multiples).
CE77 PC Programming Software
To Next Page
Loading...
Need help?
General
