Vertex Standard VX-2100 Series User Manual

VX-2100/-2200 SERIES OPERATING MANUAL10
Description of Operating Functions
MONITOR
(
MONI
)
Press (or press and hold) the assigned programmable key to cancel CTCSS- and
DCS-controlled squelch; the TX/BUSY indicator will glow green
SQUELCH
(
SQL
)
OFF
Press (or press and hold) the assigned programmable key to open the SQL to hear
background noise (unmute the audio); the TX/BUSY indicator will blink green.
SQUELCH
(
SQL
)
SET
You can manually adjust the squelch level using this function:
 Press (or press and hold) the assigned programmable key. A tone will sound,
and the current squelch will level appears on the display.
 Press the
[

]
/
[

]
button to select the desired squelch level.
 Press this key again. A tone will sound, and the display will revert to the normal
channel indication.
DIMMER
Press (or press and hold) the assigned programmable key to select the brightness
level of the display. Available selections are four levels.
CHANNEL UP/DOWN
Press (or press and hold) the assigned programmable key (generally the
[

]
/
[

]
button) to select a different channel within the current group.
CC UP/DOWN
(
CONTINUOUS CH UP/DOWN
)
Press and holding in the assigned programmable key causes the radio to begin step-
ping (repeatedly) upward or downward through the channels.
GROUP UP/DOWN
(
This function is only available in the VX-2200
)
Press (or press and hold) the assigned programmable key to select a different group
of channels
ADVANCED OPERATION

Vertex Standard VX-2100 Series Specifications

General

Brand	Vertex Standard
Model	VX-2100 Series
Category	Transceiver
Language	English