VX-2100/-2200 SERIES OPERATING MANUAL 17
KEY LOCK
Press (or press and hold) the assigned programmable key to lock the various aspects
of the transceiver’s keys. The precise lockout configuration must be programmed by
your VERTEX STANDARD dealer.
SET
(
This function is only available in the VX-2200
)
Press the assigned programmable key to activate the “User Set” (Menu) Mode.
ARTS (Auto Range Transpond System)
This system is designed to inform you when you and another ARTS-equipped sta-
tion are within communication range.
During ARTS operation, when the radio receives an incoming ARTS signal, a short
beep will sound, and “IN SVC” (“In Service”) will be displayed on the LCD for 2
seconds
. If you move out of range for more than two minutes, your radio senses
that no signal has been received; a short triple-beep will sound, and “OUT SVC”
(“Out of Service”) will be displayed on the LCD for 2 seconds
. If you subsequently
move back into communication range, as soon as the other station transmits, a short
beep will sound and “In” will be displayed again on the LCD for 2 seconds
.
: The VX-2100 only.
DTMF Paging System
(
Requires the optional FVP-25 Encryption/DTMF Pager Unit
)
This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches yours,
your radio’s squelch will open and the alert will sound.
In the VX-2200, the three-digit code of the station which paged you will be dis-
played on your radio’s LCD.
ADVANCED OPERATION
To Next Page
Loading...
Need help?
General
