Vertex Standard VX-451 - Monitoring Features

VX-450 SerieS Operating Manual
26
adVanced operatIon
prI-2 set
Press (or press and hold) the assigned programmable
key to toggle the current channel to the priority chan-
nel 2 “enable” and “disable”.
prI-2 dIsaBle
Press (or press and hold) the assigned programmable
key to disable the priority channel 2 of the group tem-
porarily.
dIrect cH1 to cH4
(
Vx-454 & Vx-459 only
)
Press (or press and hold) the assigned Programmable
key to recall the Dealer pre-programmed channel di-
rectly.
dIrect cH entry
(
Vx-459 only
)
You can recall the desired channel directly using this
function:
r
Press (or press and hold) the assigned program-
mable key. A tone will sound, and the current
group/channel number will appear on the display.
r
Enter the desired group number (two digits) and
channel number (two digits) by the keypad.
r
Press the
[
D
]
key to store the new setting. The
display indicates “
- SET -
” briey, then reverts to
the normal channel indication.
You may cancel the new setting by pressing the
[
C
]
key. In this case, the display indicates “
- CANCEL -
”
briey.