To Next PageTo Next Page
Need help?Do you have a question about the Vertex ORUM II and is the answer not in the manual?
General| Brand | Vertex |
|---|---|
| Model | ORUM II |
| Category | Water Pump |
| Language | English |
Key safety instructions that must be followed during installation, operation and maintenance of the product.
Guidelines to reduce the risk of serious bodily injury or death from suction entrapment.
Information and warnings regarding the dangers of electric shock, burns, and electrocution.
Essential safety checks to perform before conducting pressure tests on the system.
General advisory points and recommendations for pool and spa usage and pump operation.
Essential requirements for installing the pump, including location, ventilation, and stability.
Guidance on selecting pipe diameter, using Teflon tape, and supporting pipes.
Ensuring the suction system provides protection against suction or hair entrapment.
Instructions for maintaining, replacing, and correctly installing suction outlet covers for safety.
Requirements for installing multiple suction outlets to ensure safe water circulation.
Ensuring the motor voltage is within +/- 10% of the nameplate rating for optimal performance.
Proper grounding procedures for the motor and associated electrical equipment.
Information on pumps equipped with dual voltage motors and wiring instructions.
Guidelines for permanently connecting the pump to the circuit and selecting appropriate cable/breaker sizes.
Warning against operating the pump without water to prevent seal damage and leaks.
Safety procedures required before removing the pump trap cover.
Precautions to prevent fire hazards and burns when handling the motor.
Step-by-step instructions on how to fill the pump with water before starting.
Conditions under which the warranty does not apply.
