• Compressor
The cooling module is equipped with a variable speed inverter rotary compressor that
works on R410A refrigerant and which varies its cooling output capacity as per the
cooling demands.
• Condenser Coil
The L-shaped condenser coil is designed for a maximum contact area. It is made of copper tubes with an
aluminum fin configuration.
• Condenser Fan
The condenser unit is equipped with an AC fan which varies the operating speed
with the cooling variations of the compressor to maintain a suitable condensing
pressure. The condenser fans are made of metallic material for prolonged life and
durability..
To Next Page
Loading...
Need help?
General