SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications
Characteristic
Rear hub oil
Quantity: approx. 85 cc
03_04
Tyres (03_04)
Periodically check the inflation pressure of each tyre (when cold).
Tyres are fitted with wear indicators; tyres should be replaced as soon as these indi-
cators become visible on the tyre tread. Also check that the tyres do not show signs
of splitting at the side or irregular tread wear; If this occurs, go to an authorised work-
shop or at least a workshop equipped to perform the removal and the refitting.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.
Characteristic
Front tyre pressure
1.6 bar
Rear tyre pressure
2 bar
Rear tyre pressure - driver and passenger
2.2 bar
27
To Next Page
Loading...
Need help?
General