03_20
03_21
Front direction indicators (03_21)
In order to replace the front turn indicator bulbs remove the light taking off the retaining
screws, then remove the bulb holder form its support; gently turn the bulb around 30º
and remove it. Follow the process in reverse order to refit.
03_22
Rear optical unit (03_22)
To access the rear taillight bulb it is necessary to remove the 2 fixing screws «D».
Gently push and turn the bulb about 30° and then remove it. To refit follow the same
steps but in reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS RELATED TO THE HUMIDITY AND/OR
TO LOW TEMPERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
38
To Next Page
Loading...
Need help?
General