English - 39 -
*Images must have an aspect ratio of 4:3 or 16:9 and
theymustbein.jpeg,.jpgor.jpeleformats.
Quick Menu
The Quick Settings menu allows you to access
some options quickly. This menu includes Power
Save Mode, 3D Mode, Virtual 3D, Picture Mode,
Equalizer Settings, Favourites, Sleep Timer,
FollowMe TV (Optional), CEC RC Passthrough and
Information booklet options. Press Q.MENU button
on the remote control to view the quick menu. See the
following chapters for details of the listed features.
FollowMe TV (Optional)
With your tablet you can stream the current broadcast
from your smart TV using the FollowMe TV feature.
Install the appropriate application to your tablet PC.
Start the application.
For further information on using this feature refer to
the instructions of the application you use.
E-Manual (Optional)
You can nd instructions for your TV’s features in
the E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen.
By using the navigation buttons select a desired
category. Every category includes a different topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit button.
Note: The contents of the E-Manual may vary
according to model.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Other Settings menu
under Settings menu should be set as Enabled
at rst. Press the Source button and select the
HDMI input of the connected CEC device from the
Source List menu. When new CEC source device
is connected, it will be listed in source menu with
its own name instead of the connected HDMI ports
name(DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source
has been selected.
To terminate this operation and control the TV
via the remote again, press and hold the “0-Zero”
button on the remote control for 3 seconds. Or
press Q.Menu button on the remote, highlight the
CEC RC Passthrough and set as Off by pressing
Left or Right button. This feature can also be
enabled or disabled under the Settings/Other
Settings menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to
replace other cables between the TV and the audio
system (A/V receiver or speaker system).
When ARC is active, TV does not mute its other
audio outputs automatically. So you need to
decrease TV volume to zero manually, if you want
to hear audio from connected audio device only
(same as other optical or co-axial digital audio
outputs). If you want to change connected device’s
volume level, you should select that device from
the source list. In that case volume control keys are
directed to connected audio device.
To Next Page
Loading...
Need help?
General