English - 53 -
Vestel Smart Center
With your smart tablet, you can easily stream your
favorite live shows and programs from your smart TV.
Also; you can launch your portal applications, use your
tablet as a remote control for your TV and view photos.
Getting Started
To use Vestel Smart Center features connections
have to be done properly. To get connected with your
tablet PC, plug in the Wi-Fi dongle to one of the USB
ports if your TV doesn’t have internal Wi-Fi feature.
And connect your network cable properly to the LAN
input of your TV for internet connection.
IMPORTANT: To use smart TV functions via your
tablet PC a wireless connection is needed. Make
sure the TV and tablet PC are connected to the
same network.
Press the Menu button on the remote, highlight
Settings and press OK. Highlight Other Settings
and Press OK. Highlight DLNA Renderer and change
as Enabled.
Press the Q-Menu button to display the Quick menu
on screen. Select FollowMe TV option and press OK
to activate. If there is no device connected to your TV
then a warning message will be displayed.
Your TV is ready to connect to your tablet PC now.
Install the Vestel Smart Center application to your
tablet PC.
Start the smart center application. If all connections
areconguredproperlyyouwillseeyourTV’sname
on your tablet PC. If your TV’s name doesn’t appear
on the list, wait a while and tap on the Refresh widget.
Select your TV from the list.
Tablet PC screen
On the main screen you cannd tabs to access
various features such as EPG, Portal and Settings.
TV: You can watch content through the TV tab. In
this mode you can navigate through the channel list
retrieved from your TV and click on thumbnails to
view the detail pages.
TIMERS: You can view your active recordings and
reminders through this tab. To delete any item, simply
press on the delete icon found on each row.
EPG: You can view the broadcast schedules of
selected channel lists through this tab. You can
also navigate through channels by pressing on the
selected channel on the EPG grid. Please note that
updating / refreshing the EPG information may take
a while depending on your network and web service
quality.
PORTAL: This tab displays the Portal applications
in scrollable view. Unless FollowMeTV is active, the
selected application will be displayed on your TV
screen.
SETTINGS:
Conguretheapplicationtoyourliking.
You can change;
Auto-lock: The screen of the device automatically
turns off after a certain amount of time. Default is
off, which means the screen will always stay on.
Auto-enable FollowMeTV: FollowMeTV function
will start automatically when this setting is enabled.
Default is disabled.
Auto-connection to TV: When enabled, your
tablet will automatically connect to any available
and previously connected TVs and skips the TV
search screen.
Change TV (Only in IOS): You can press on this
setting to go to the “TV search” screen and change
to a different TV.
Version No: Displays the current version of the
application.
FollowMe TV Feature
Tap on the FOLLOW ME TV widget(
) located at
the bottom left of the screen to change the layout for
FollowMe feature.
Tap the play icon to connect the tablet to your TV and
watch content on your TV screen, as long as your
tablet is in your routers operation range.
If you want to pause a live broadcast, press the Pause
button. Timeshift recording will start in a few seconds.
If you want to watch this video on your tablet PC press
the Red button.
To disable this feature, press the Q-Menu button on
the remote and disable FollowMe TV feature.
Note:
For streaming content from your TV a suitable USB disk
has to be connected to your TV. If your USB disk doesn’t
meet the speed requirements, you will not be able to
use this feature. Try connecting another USB disk.
Note that only digital(DVB-T/C/S) and SD channels
are supported.
Multilanguage audio support and subtitle on/off
features are not functional.
The streaming performance may change depending
on the quality of your connection.
Smart Remote Feature
You can use your tablet as a remote control for your
TV once it has connected to the TV. To use smart
remote’s full features tap on the Up-arrow on the
bottom left side of the screen.
Portal Launcher
To access the Portal Launcher widget tap on the Up-
arrow on the bottom left side of the screen.
You can access the portal page by tapping on the
Portal Launcher widget (Internet connection is
required).
To Next Page
Loading...
Need help?
General