EN - 25 -
BEFORE CALLING THE SERVICE
PART- 6.
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR TYPE MEANING WHY ? WHAT TO DO ?
SR
"Failure
Warning"
There is/are some
part(s) Out of order
or there is a failure in
cooling process
Call a service agent for
assistance as soon as
possible.
LF
Freezer comp.
Not Cold
enough
This caution will be
seen, especially after
long term of power
failure
1. Use food in short time
period. Do not freeze
foods that has thawed.
2. Set the freezer
temperature to colder
values or set the
super freeze until the
compartment gets to
normal temperature
3. Do not put fresh food in
the appliance until the
fault has cleared.
LC
Refrigerator
comp.
Not Cold
enough
Ideal temperature for
Ref. Compartment is
+4 oC. If you see this
warning your foods
are at risk of spoiling.
1. Set the refrigerator
temperature to colder
values or set the super
cooling mode until the
compartment gets to
normal temperature.
2. Open the door as little
as possible until the
fault clears.
LF and LC not cold enough
This is a combination
of LF and LC Error
type
You will see this failure
when rst starting the
appliance. It will clear after
the compartments reach
normal temperature.
HC
Refrigerator
comp. too Cold
The food starts to
freeze because the
temperature is too
cold
1. Check if the “Super
cooling mode” is on
2. Decrease the
refrigerator temperature
values
To Next Page
Loading...
Need help?
General
