English - 13 -
HDMI True Black
While watching from HDMI source,this feature will be visible in the Advanced
Settings menu.You can use this feature to enhance blackness in the picture.
You can set this feature as “On” for activating HDMI True Black mode
Volume Adjusts volume level.
Equalizer
In equalizer menu, the preset can be changed to Music, Movie, Speech,
Flat and User. Press the MENU button to return to the previous menu.
Equalizer menu settings can be changed manually only when the Equalizer
Mode is in User.
This setting is used for emphasizing left or right speaker balance.
Sound Mode
You can select Mono, Stereo, Dual I or Dual II mode, only if the selected
channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function sets the sound to obtain
xed output level between programmes (For instance, volume level of
advertisements tend to be louder than programmes).
Reset Resets the picture settings to factory default settings.
Sleep Timer
Sets sleep timer. The timer can be programmed between Off and 2 hours
(120 minutes) in steps of 10 minutes. If Sleep Timer is activated, at the end
of the selected time, the TV goes automatically to standby mode.
Child Lock
Enables or disables child lock. When On is selected, the TV can only be controlled
by the remote control. In this case the control panel buttons will not work, except
for the Standby/On button. When Child Lock is activated you are able to switch the
TV to Standby mode with the Standby/ On button. To switch the TV on again, you
need the remote control. Hence, if one of those buttons is pressed, Child Lock Is
On will be displayed on the screen when the menu screen is not visible.
Sets the language.
Default Zoom (Optional)
While zoom mode is set as AUTO, the TV will set the zoom mode in accordance
with the signal of the broadcast. If there is no WSS or aspect ratio information,
the TV will then use this setting to adopt. Press “ ” or “ ” button to select Default
Zoom. You can set Default Zoom to 16:9 or 4:3 pressing “
” or “ ” button.
Blue Background
Activates or deactivates blue background system when the signal is weak
or absent.
Menu Timeout Changes timeout duration for menu screens.
TXT Language Sets the teletext language.
EXT Out
Enables or disables EXT Out. For copying from a DVD or VCR device, you should
choose desired source from source menu and turn “On” to EXT Out from feature
menu. Ext Out should be On in order to use Timers function in the DTV mode.
Auto TV Off
You can set the timeout value of auto off feature. After the timeout value is
reached and the Tv is not operated for selected time , the TV will go off.
Store Mode (optional)
If you set store mode to “ON”, your TV’s features will be illustrated on the
top of the screen. To deactivate this feature, please set to “OFF”.
Sets Backlight to Auto,Medium, Maximum or Minimum.
Power Save Mode (optional)
Sets Power Save Mode as On or Off. If you set Power Save Mode as On,
the TV will switch to energy-saving mode and luminance level of TV set
will be decreased to optimum level. Note that some picture settings will be
unavailable to be changed when the TV is in Power Save Mode.
To Next Page
Loading...
