VEVOR APD30 - Page 9

- 8 -
5.Possible anomalies
anomaly
cause
solution
The machine does
not start
Electrical power is
missing the input
voltage is wrong.
other reasons
1.Check the general switch,
the plug and the feeding
cable
2.use a proper voltage.
3.stop using and apply for
authorized assistance from
the manufacturer.
The machine
conduct
electricity
The wires touch the
structure of the
machine
Check the wires , verify the
wires do not touch the
structure of the machine.
Only a group roller
working
the belt is broken.
the worm wheel is
worn out.
change the belt.
change a new worm wheel.