Factory setting temperature
BC-145WS: Factory temperature set at 41℉ (5℃).
BC-145WD: The factory temperature in the upper zone is set at 54℉ (12℃); The
factory temperature in the lower zone is set at 41℉ (5℃).
BCD-145WD: The factory temperature in the upper zone is set at 41℉ (5℃); The
factory temperature in the lower zone is set at 5℉ (-15℃).
Operation Anomalies
Ensure that there is power to the electrical supply plug by connecting another
electrical appliance to it. Check fuse, if any. Make sure that the door is closed
properly.
If the unit appears to be malfunctioning, unplug it and contact your after sales
service. Any intervention on the cold circuit should be performed by a refrigeration
technician who should carry out an inspection of the circuit sealing system.
Similarly, any intervention on the electrical circuit should be performed by a
qualified electrician.
IMPORTANT: Any intervention performed by a non-authorized technician by will
lead to the warranty being considered as null and void.
Power Failures
In the event of a power interruption, all previous temperature settings are
automatically preservation and it will revert to a pre-set temperature setting.
To Next Page
Loading...
