EasyManua.ls Logo

VEVOR BCD-145WD - Preparation and Installation; Preparation

VEVOR BCD-145WD
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 6 -
BC-145WD
PREPARATION AND INSTALLATION
Preparation
— Allow 24 hours before switching on the refrigerator. During this time we
recommend that you leave the door open to clear any residual odors.
— The location you have selected for your refrigerator should:
· Be unencumbered and well ventilated
· Be well away from any heat source and direct sunlight
· Not be too damp (laundry, pantry, bathroom etc.)
· Have a flat floor
· Have a standard and reliable electricity supply (standard socket to country
standards, linked to the ground), it is not recommended to use a multi-socket or
extension lead
· Have a surge protector fitted to the electrical outlet
· Away from the microwave oven. Certain microwave ovens do not have wave
interference shield. When placed within 1 meter vicinity of the wine cabinet,
they may affect the operation of the refrigerator.