· Avoid locating the unit in moist areas, like a garage.
— The unit should be placed where the ambient temperature is proper. If the
temperature is above or below this range, it will affect the performance of the unit.
Placing in cold or hot temperature conditions may cause cellar's temperatures
fluctuating, and it will not reach the ideal one.
Installation
— Read the instruction manual.
— Unpack and remove all of the protection and adhesive strips from the
packaging around and inside the refrigerator.
— The refrigerator must be positioned such that the plug is accessible. Release
the power cord. Move your refrigerator to its final location. The refrigerator should
be installed in a suitable place where the compressor will not be subject to
physical contact.
— Leveling your refrigerator: Units must be leveled before loading your drinks.
The unit is equipped with 4 adjustable feet to facilitate easy leveling. It’s
recommended that you tighten the back feet to the maximum and adjust the front
feet to level the unit.
Built-in Instructions
— “built-in” refrigerators and beverage centers are front venting but are not
designed to be fully integrated behind a joinery door.
— Please follow the installation diagram when installing a built-in unit. No less
than the minimum installation dimension or it will affect the venting of refrigerator.
To Next Page
Loading...
