VEVOR KH-9060 - Operation Manual; General Safety Precautions

02
OPERATION MANUAL
V Before operating the equipment, the user must carefully read the operation manual of this
specication and strictly abide by the rules. This manual is applicable to multiple models of
products.
★This equipment uses international standard four types of laser (strong laser radiation).
Laser radiation may cause the following events: ①Ignite surrounding combustibles; ②During
the laser processing process, due to dierent processed objects, other radiation and other
toxic and harmful eects may be generated Gas; ③Direct laser radiation may cause personal
inju. Therefore, the equipment must be equipped with re-ghting equipment It is strictly
forbidden to stack ammable and explosive materials on the workbench and around the
equipment. At the same time, ensure good ventilation. Non-professional operators are not
allowed to approach the equipment.
★Laser processing objects and emissions should comply with local laws and regulations.
★Laser processing may have high risks, so you should carefully consider whether the object
is suitable for laser processing.
★The internal laser equipment has high voltage and other dangers, except for equipment
operators, it is strictly prohibited to disassemble.
★When the equipment is turned on, someone must be guarded, unauthorized leaving is
prohibited, and all power must be cut o before personnel leave.
★it is forbidden to open any doors when the equipment is working.
★Before staing operation, this equipment and other equipment must be safely and eec-
tively grounded.
★Do not place any unrelated total reection or diuse reection objects in the device to
prevent the laser from being reected on the human body or ammable objects.
★During the operation of the equipment, the operator must always obsee the operation of
the equipment. If an abnormal situation occurs, please immediately cut o all power supplies
and actively take corresponding measures.
★The equipment should be in a d, pollution-free, vibration-free, and strong electromagnet-
ic inteerence environment, with a working temperature of 5-40 degrees Celsius and a
humidity of 5-95% (non-condensing water environment).
★The equipment should always be far away from electrical equipment sensitive to electro-
magnetic inteerence, otherwise it may cause electromagnetic inteerence.
★The working voltage of the equipment is: AC220V AC110V (Please conrm the working
voltage of the equipment before use)