03
★The most impoant carbon dioxide glass laser in the equipment is a consumable and a
vulnerable item. Please take care of it during use. The carbon dioxide glass laser needs pure
cold water to cool down. Please pay attention to the water temperature not to exceed 30
degrees Celsius during use, otherwise the laser will be damaged. When the surrounding
temperature is about to drop below 0 degrees Celsius, please replace it with an antifreeze
liquid to avoid damage to the carbon dioxide glass laser.
It is forbidden to turn on the equipment when the grid voltage is unstable or mismatched,
and the manufacturer and seller are not liable r any loss caused by incorrect use or
non-compliance with the above regulations.
To Next Page
Loading...
