14. If it is difficult to start the unit, please turn the Switch two rounds
to balance the internal pressure and make it easier to start the unit*
15. The Low Pressure Gauge shows the pressure of the intake port
of the compressor and the High Pressure Gauge shows the
pressure of the outlet port of the recovery unit.
16. After using, please turn the knob to "0" position.
SPECIFICATION
Category Ⅲ: R12, R134a, R401C, R406A, R500
110-120VAC 60Hz, 220-240 VAC 5O-6OHz
3/4HP, Single cylinder
system
1 HP,twin cjdinder system
Oil-less, Air-cooled, Piston
Recovery
Rate(kg/ min)
Liquid