Chapter 3
36
Typematic Delay (Msec)
When Typematic Rate Setting is enabled, this item allows you to select the
delay between when the key was first pressed and when the acceleration
begins. Settings:
250, 500, 750
and
1000
Security Option
If you have set a password, select whether the password is required every
time the System boots, or only when you enter Setup. Settings are described
below:
Setup
The password prompt appears only when end users try
to run Setup.
System
A password prompt appears every time when the
computer is powered on or when end users try to run
Setup.
Display Full Screen Logo
Show full screen logo during BIOS bootup process. Settings:
Enabled
and
Disabled
Show Summary Information
Show the summary information during the BIOS boot process. Settings:
Enabled
and
Disabled
Display Small Logo
Show small energy star logo during BIOS boot up process. Settings:
Enabled
and
Disabled
To Next Page
Loading...
