BIOS Setup
39
I
NTEGRATED
P
ERIPHERALS
Onboard IDE Channel 1/2
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose
Enabled
to activate each channel separately.
Settings:
Enabled
and
Disabled
IDE Prefetch Mode
This allows your hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block transfer,
multiple commands or multiple sector read/write.
Enabled
enables IDE
controller to use block mode;
Disabled
allows the controller to use standard
mode. Settings:
Enabled
and
Disabled
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings:
PCI Slot
and
AGP
Frame Buffer Size
This setting instructs the BIOS to reserved the specified amount of memory
for the internal video controller. Settings:
16M, 32M, 64M
To Next Page
Loading...
Need help?
General
