Viavi SmartClass OLTS-85 - OLTS-85;OLTS-85 P Loss Test Set Features

8 OLTS-85/OLTS-85P
1 INTRODUCTION
OLTS-85/OLTS-85P LOSS TEST SET
OLTS-85/OLTS-85P Loss Test Set
The SmartClass™ Fiber OLTS-85/OLTS-85P (optical loss test set)
contents high-performance, easy-to-use instruments with a two
or four wavelength light source and a power meter. They are
universal instruments for Tier 1 certification of single-mode and
multi-mode fibers, installation, maintenance, and
troubleshooting. Automate pass/fail end-face analysis for all
fiber types, and gain complete test visibility at both local and
remote ends. Use pre-configured cabling specifications from all
leading manufacturers.
Loss can be measured simultaneously at two wavelengths. Quick
referencing for all built-in wavelengths can be effected
independent of the current measurement mode.
Key Benefits of the OLTS-85/OLTS-85P Loss
Test Set
Test-Tool mode
• Test application centric approach.
• Achieve complete network certification with the OLTS-85/
OLTS-85P.
• Optimize productivity with the industry’s fastest test workflow.
• Obtain comprehensive results for the latest TIA 568.3,
ISO 11801, and ISO 14763-3 requirements.
• View test setup and results data and edit labels at both local
and remote ends.
• Objective pass/fail testing for fiber end-face requirements.
Workflow mode
• Label list centric approach.
• Guided testing of large number of equal test points with
predefined tests.
• Visual display of measurement progress.
• Quick overview of passed and failed test.
Features
• Multi-mode (850/1300 nm) and single-mode (1310/1550 nm)
adapters for Tier 1 fiber certification (loss/length/polarity).
• Industry-leading P5000i Digital Probe fiber end-face
inspection probe support.