3
定格外禁止
Do Not Use
Do not place the balance on an unstable
base or use the balance in a location
where it may be subjected to shock.
• The loaded sample may fall off the
measurement pan.
• Accurate measurement may be rendered
impossible.
定格外禁止
Do Not Drop
Do not lay the AC adapter cable on the
surface of the passage.
• Somebody may trip on the cable, causing
the balance to fall off, thereby causing
injury and/or damage to the balance.
定格外禁止
Do not Handle
with Wet Hands
Do not touch the AC adapter or balance
with wet hands.
• Danger of electric shock
定格外禁止
Keep Dry
Do not use the balance in a location were it
may be subjected to excess moisture.
• Electric shock or short-circuiting could
occur.
• The balance may be corroded, with
resultant malfunction.
定格外禁止
Do Not Leave
Afloat
Do not use the balance with its adjusters
lifted.
• The balance will become unstable,
preventing accurate measurement.
定格外禁止
Avoid Dust
Do not use the balance in a location where
it may be subjected to excess dust.
• Risk of explosion or fire
• Short-circuit or lack of continuity may
occur, leading to a malfunction of the
balance.
RECOMMENDED
Calibrate
Balance
Calibrate the balance after installation or
relocation.
• Measurement values may contain errors,
preventing accurate measurement from
being conducted.
To Next Page
Loading...
