Vibrapower JF-B-01 - REMOTE CONTROL FUNCTIONS; REMOTE CONTROL OPERATION

5
FUNCTIONS OWNERS MANUAL
4
UNPACKING OWNERS MANUAL
WARNING -Vibrapower™Slimisheavy.
Please ask a friend or family member to
help you unpack and position the unit.
• Toavoiddangerofsuffocation,please
keep all plastic bags out of the reach
of children.
• Check that there is no damage to the
unitpriortouse.Incaseofvisible
damage before or during use, unplug
the Vibrapower Slim and contact your
Vendor. Do not attempt to use the
Vibrapower Slim.
• Vibrapower Slim is designed for
home use only and is not intended for
commercial use. Please do not use
outdoors.
• Please retain all packaging and
paperwork for future use and store
safely away from children and
animals.
• The Remote Control, Resistance
Bands and Power Cord are all located
in the polystyrene packing, please
take care not to dispose of these
important items by accident.
WHAT YOU WILL FIND IN THE BOX
• Vibrapower™ Slim Unit
• Remote Control
• 2 x Resistance bands
• Power Cord
FEATURES
1. UpperCover
2. MiddleCover
3. BaseCover
4. Platform
5. Roller
6. Foot Pad
7. AC Socket
8. Control Panel
9. RemoteControlReceiver
10. Decrease Speed
11. Increase Speed
12. Decrease Time
13. Increase Time
14. Start/Stop Button
15. Program Button
16. Power Button
17. Speed Display
18. Time Display
YOU WILL NEED
• 2 x AAA batteries for the remote
control
1
2
3
7
4
6
5
8
18
12
13
11
10
16 15 14
9
17
REMOTE CONTROL
POWER - Turns the machine on or off.
PROGRAM - Pressing this button will
selecttherstautomaticprogram.Ifyou
press it again it will select the second
program, repeatedly pressing it will cycle
through the automatic programs and
manual mode. See “Settings and Use”
for more details on programs.
START/STOP - Pressing this button
will start and stop the machines in all
modes, then you can adjust the speed
when in use. You cannot adjust the time
when in use.
INCREASE TIME - Will increase the time
of the program. This needs to be done
before starting the program. Default
time is 10 minutes, will adjust time by 1
minute at a time. Cannot increase time
over10minutes.
DECREASE TIME - Will decrease the
time of the program. This needs to be
done before starting the program.
Default time is 10 minutes, will adjust
time by 1 minute at a time.
INCREASE SPEED - Will increase the
speed during in use in manual mode.
Betweenlevels1-20.ThisWillnot
function during automatic programs.
DECREASE SPEED - Will decrease the
speed during in use in manual mode.
Betweenlevels1-20.Thiswillnot
function during automatic programs.
Theeffectivereceptionrangeofthe
remote control is 2.5 metres, the infrared
emission indicator of the controller should
bealignedtothereceivingwindowonthe
display of the unit.