Victaulic FireLock 751 Series User Manual

I-751.Europe / European Alarm Check Valve Stations / Installation, Maintenance, and Testing Manual
SECTION III
• Inspection/Testing Requirements
WARNING
• The building owner or their representative is responsible for maintaining the
fire protection system in proper operating condition.
• To ensure proper system operation, reference current, applicable local and
national fire protection standards, along with applicable building and fire
codes, for valve inspection requirements. The authority having jurisdiction in
the area may require these inspections on a more frequent basis. Verify these
requirements by contacting the authority having jurisdiction in the affected
area, and always refer to the instructions in this manual for additional
inspection and testing requirements.
• The frequency of inspections shall be increased in the presence of
contaminated water supplies, corrosive/scaling water supplies, and corrosive
atmospheres.
Failure to follow these instructions could cause system failure, resulting in death
or serious personal injury and property damage.
I-751.Europe_13 REV_G

Victaulic FireLock 751 Series Specifications

General

Brand	Victaulic
Model	FireLock 751 Series
Category	Control Unit
Language	English