5. Open the Fuel Valve Stem Assembly about 1/8 of a turn.
Ignite the gas with a spark lighter. Continue opening the
Fuel Valve until the flame stops smoking.
6. Open the Oxygen Valve until a bright neutral flame appears.
7. Place the Tip on a re brick at approximately 10° from the
vertical (see Figure). Depress the Cutting Oxygen Lever.
Rock the Torch from side to side for 5-8 seconds. The Torch
will “pop” during this operation.
© 2012 Victor Technologies International, Inc. www.victortechnologies.com Printed in Mexico
U.S. Customer Care: 800-426-1888
•
Canada Customer Care: 905-827-4515
•
International Customer Care: 940-381-1212
INNOVATION TO SHAPE THE WORLD
™
T ECHNOLOGIES
™
THE AMERICAS
Denton, TX USA
U.S. Customer Care
Ph: 1-800-426-1888 (tollfree)
Fax: 1-800-535-0557 (tollfree)
International Customer Care
Ph: 1-940-381-1212
Fax: 1-940-483-8178
Miami, FL USA
Sales Office, Latin America
Ph: 1-954-727-8371
Fax: 1-954-727-8376
Oakville, Ontario, Canada
Canada Customer Care
Ph: 1-905-827-4515
Fax: 1-800-588-1714 (tollfree)
EUROPE
Chorley, United Kingdom
Customer Care
Ph: +44 1257-261755
Fax: +44 1257-224800
Milan, Italy
Customer Care
Ph: +39 0236546801
Fax: +39 0236546840
ASIA/PACIFIC
Cikarang, Indonesia
Customer Care
Ph: 6221-8990-6095
Fax: 6221-8990-6096
Rawang, Malaysia
Customer Care
Ph: +603 6092-2988
Fax: +603 6092-1085
Melbourne, Australia
Australia Customer Care
Ph: 1300-654-674 (tollfree)
Ph: 61-3-9474-7400
Fax: 61-3-9474-7391
International
Ph: 61-3-9474-7508
Fax: 61-3-9474-7488
Shanghai, China
Sales Office
Ph: +86 21-64072626
Fax: +86 21-64483032
Singapore
Sales Office
Ph: +65 6832-8066
Fax: +65 6763-5812
Fire Brick
!
WARNING
If you experience a backfire or backflash (flame disappears suddenly and/or a hissing sound IS heard when the flame is burning inside the
torch), IMMEDIATELY turn OFF first the Oxygen Valve and then the Fuel Valve. Allow the Torch to cool before reusing it. If the trouble reoccurs,
disassemble the Torch. Replace any damaged parts.
8. After testing is completed, release the Cutting Oxygen Lever. Close the Oxygen Valve and the Fuel Valve.
9. Close the Cylinder Valve or Gas Supply.
10. Open the Oxygen Valve. Release the oxygen from the system. Once all the oxygen is released from the system, close the Oxygen
Valve.
11. Open the Fuel Valve. Release the fuel gas from the system. Once all the fuel gas is released from the system, close the Fuel
Valve.
12. Remove the Hoses from the Torch.
To Previous Page
Loading...
Need help?
General
