Victoria Arduino ADONIS 3 gruoups - Page 40

3938
EN
39
indeX
TECHNICAL CHARACTERISTICS ...................... 37
1. GENERAL REMARKS ON
THE CONSIGNMENT .......................................... 39
1.1 SAFETY REGULATIONS .................................................................... 39
2. DESCRIPTION ..................................................... 41
2.1 ACCESSORIES LIST ......................................................................... 42
3. TRANSPORT AND HANDLING ...........................43
3.1 APPLIANCE IDENTIFICATION............................................................ 43
4. INSTALLATION AND PRELIMINARY
OPERATIONS ...................................................... 44
5. ADJUSTMENTS TO BE MADE BY
A QUALIFIED TECHNICIAN ONLY ...................... 46
5.1 FILLING BOILER MANUALLY .............................................................46
5.2 PRESSOSTAT / PUMP ADJUSTMENT ................................................ 47
5.2.1 PUMP ADJUSTMENT ...........................................................................................47
5.2.2 PRESSOSTAT ADJUSTMENT ...............................................................................47
5.3 HOT WATER ECONOMISER ADJUSTMENT ...................................... 48
5.4 CLOCK BATTERY REPLACEMENT .............................................................49
6. USE ...................................................................... 50
6.1 TURNING THE MACHINE ON ............................................................ 50
6.2 LED SWITCH ON .............................................................................. 52
6.3 BUTTONS KEY (Selection Configuration) ............................................. 52
6.4 STEAM FLOW ADJUSTMENT ............................................................53
6.4 ADJUSTING THE TURBOCREAM NOZZLE (If Fitted) ..........................53
6.4 ADJUSTING THE AUTOSTEAM NOZZLE (If Fitted) ............................. 54
7. PROGRAMMING .................................................. 55
7.1 KEY ...................................................................................................55
7.2 PROGRAMMING ..............................................................................................55
8. CLEANING AND MAINTENANCE........................ 65
8.1 SWITCHING OFF THE MACHINE ......................................................65
8.2 CLEANING THE OUTSIDE OF THE MACHINE ...................................65
8.3 CLEANING THE STAINLESS COFFEE-HOLDERS ..............................65
8.4 CLEANING THE UNIT WITH THE AID OF THE BLIND FILTER ............66
8.5 CLEANING FILTERS AND FILTER-HOLDERS ....................................66
9. MACHINE FUNCTION MESSAGES .................... 67