Victoria Arduino ADONIS 3 gruoups

6564
EN
65
SELECTING THE DESIRED LANGUAGE
• Thedisplaywillread:
• Pressthe ENTER, key to visualise the language
already set. Choose the desired language by
using the   keys.
• ToconfirmpressENTER.
TEMPERATURE UNITY MEASURE SELECTION
• Thedisplayreads:
• BypressingENTER, the display will read:
or
• Press  to modify the measures unit setted.
• PressENTER to confirm.
KEYBOARD LIGHTING ADJUSTMENT
• Thedisplayreads:
• BypressingENTER, key, the display will read:
• With theKEYS light Xblinking. Select thevalue
of desired brightness choosing from a minimum
value of 1 to a maximum of 6 by using  
keys.
• ConfirmbypressingENTER.
• ThetemperatureDISPLAYvalueYblinksand
 keys it is possible to set the display lighting Y
from a minimum value of 1 to a maximum of 3.
• ConfirmbypressingENTER.
• Thedisplaywillvisualizethemessage:
LANGUAGE
TEMPERATURE
celsius
fahreneit
LIGHT ADJUSTMENT
KEYS x
display y
LIGHT ADJUSTMENT