Need help?Do you have a question about the Victron energy Blue Smart IP22 12/15 and is the answer not in the manual?
General| Output Current | 15 A |
|---|---|
| IP Rating | IP22 |
| Bluetooth | Yes |
| Input Voltage | 100-240V AC |
| Output Voltage | 12V DC |
| Battery Type | Lead-acid, Lithium-ion |
| Protection | Over temperature |
| Battery Capacity | Up to 300Ah |
| Operating temperature | -20 to +50 °C |
| Humidity | 95% (non-condensing) |
Covers general charger safety, handling, and placement to prevent hazards.
Safe and optimal locations for the charger.
Critical warnings about explosive gases and personal safety when near batteries.
Safe procedures for connecting and disconnecting DC output clips to batteries.
Steps for preparing the battery and environment before charging.
Detailed steps for connecting the charger to a battery inside a vehicle.
Detailed steps for connecting the charger to a battery outside a vehicle.
Proper AC power cord connection and grounding for safe operation.
Use VictronConnect App for setup, monitoring, and updates across platforms.
Charge voltages for NORMAL, HIGH, and LI-ION modes at room temperature.
To Next Page