Need help?Do you have a question about the Victron energy Blue Smart IP22 and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| IP Rating | IP22 |
| Input Frequency | 45-65 Hz |
| Charge Current | 15A (varies by model) |
| Battery Voltage | 12V or 24V |
| Efficiency | 85% |
| Protection | Over temperature, Short circuit, Over voltage |
| Battery Type | Lead-acid (Gel, AGM, Flooded), Lithium-ion |
| Operating Temperature | -20 to +50°C |
| Weight | 1.3 kg |
Set-up, monitor and update the charger using smartphones, tablets or other devices.
High efficiency, low heat generation, and low standby power consumption.
Low thermal stress, overheating protection, reduced output in NIGHT/LOW modes, and silent operation.
Charger measures ambient temperature and compensates charge voltage for lead-acid batteries.
Lead-acid batteries charged in three stages: bulk, absorption, and float. Manages aging and sulfation.
Reduces charge voltage further for batteries connected for over 48 hours to limit grid corrosion.
Optional process for deeply discharged lead-acid batteries to reverse sulfation with low current, high voltage.
Never charge Li-ion batteries below 0°C. Specific charging algorithm for Li-ion ensures optimum performance.
Details charge voltages for NORMAL, HIGH, and LI-ION modes, and explains the MODE button functionality.
Outlines the BULK, Absorption, and RECONDITION phases for lead-acid battery charging.
Uses a specific charging algorithm for Li-ion batteries to ensure optimum performance. Select LI-ION mode.
Discusses applying loads while charging, limitations, and reconditioning availability.
Explains conditions that initiate a new charge cycle, such as load changes or AC supply reconnections.
Provides formulas and examples for calculating charge time to 80% and 100% for lead-acid and Li-ion batteries.
Discusses signs of battery end-of-life (high resistance, low capacity) and hints at reconditioning.
The charger can supply DC loads even when no battery is connected.
To Next Page