Need help?Do you have a question about the Victron energy Blue Smart IP22 Charger and is the answer not in the manual?
General| Model | Blue Smart IP22 Charger |
|---|---|
| Input Frequency | 45 - 65 Hz |
| Output Voltage | 12V or 24V (depending on model) |
| Enclosure Category | IP22 |
| IP Rating | IP22 |
| Bluetooth | Yes |
| Battery Types | Lead-acid, Lithium |
| Protection | Short circuit, Reverse polarity, Over temperature |
| Operating Temperature | -20°C to +60°C |
| Dimensions | Varies by model |
Connect DC/AC power, then select the appropriate charge mode for your battery type.
Learn the meaning of ABS, FLOAT, and STORAGE LEDs for charge status.
Procedure for safely disconnecting the AC power cable from the mains power outlet.
Use VictronConnect app for charger setup, monitoring, and firmware updates via Bluetooth.
Optimizes recharge cycles and charge maintenance using intelligent stages.
Intelligent absorption duration and automatic charge voltage adjustment based on temperature.
Features like overheating protection, silent operation, and robust design for longevity.
Compatibility with Li-ion batteries and use as a DC power supply for equipment.
Detailed explanation of Bulk, Absorption, Recondition, Float, Storage, and Refresh charge stages.
How ambient temperature affects charge voltage and automatic compensation.
Conditions for starting a new cycle and estimating total charging time.
Using the MODE button to select charge modes, voltage, and features.
Step-by-step guide for setting up the charger using the VictronConnect mobile app.
Managing Bluetooth PIN, disabling/enabling, and resetting connections.
How to restore charger settings to factory defaults using the VictronConnect app.
Displays live battery voltage, charge current, and active charge stage.
Visualizes charge stages against battery voltage and current.
Access historical usage data, charge cycle statistics, and charger lifetime metrics.
Configuring the charger for use as a DC power supply, including voltage settings.
Specific configuration of charge parameters, presets, and voltage compensation.
Accessing and configuring advanced options like BatterySafe, Bulk time limits, and recondition settings.
To Next Page