Viessmann Divicon Series - Installation Preparation and Sequence Overview; Fitting to Boiler with Pipe Assembly; Wall Mounting Guidelines; Module and Manifold Installation Types

3
Preparing for installation................................................................................... 4
Installation sequence
Fitting to boiler with pipe assembly (accessories)................................................ 5
Wall mounting....................................................................................................... 6
■ Fitting a single module (without manifold)......................................................... 6
■ Fitting several modules with manifold (accessories)......................................... 8
Filling the system.................................................................................................. 15
Fitting the thermal insulation................................................................................ 16
■ Low loss header (if supplied)............................................................................ 16
■ Manifold............................................................................................................ 17
■ Divicon with mixer............................................................................................. 18
■ Divicon without mixer........................................................................................ 20
Mixer extension kits
Extension kit with mixer PCB............................................................................... 22
■ Overview of electrical connections.................................................................... 22
■ Connecting the extension kit to the control unit................................................ 23
■ Connecting two extension kits.......................................................................... 27
■ Power supply.................................................................................................... 27
■ Connection and wiring diagram........................................................................ 30
■ Changing the rotational direction (if required)................................................... 31
■ Specification...................................................................................................... 31
Extension kit without mixer PCB.......................................................................... 33
■ Connecting the extension kit to the control unit................................................ 33
■ Changing the rotational direction (if required)................................................... 33
■ Specification...................................................................................................... 34
Declaration of Conformity................................................................................. 36
Index
5443 825 GB