Viessmann Solar-Divicon PS10

To Next Page

5773 841 GB 7/2014

Installation and service

instructions

for contractors

VIESMANN

Solar-Divicon and solar pump assembly

Safety instructions

Please follow these safety instructions closely to prevent accidents and

material losses.

Safety instructions explained

Note

Details identified by the word "Note" con-

tain additional information.

Installation, commissioning, inspection,

maintenance and repairs must only be

carried out by a competent person (heat-

ing engineer/installation contractor).

Before working on the equipment/heat-

ing system, isolate the power supply

(e.g. by removing a separate mains fuse

or by means of a main isolator) and safe-

guard against unauthorised reconnec-

tion.

Repairing components that fulfil a safety

function can compromise the safe oper-

ation of your heating system.

For replacements, use only original

spare parts supplied or approved by

Viessmann.

Versions

Solar control unit Circulation pump

With-

out

Vitosolic 100,

type SD1

Solar control

module,

type SM1

Multi stage Highly effi-

cient, with

PWM control

Solar-Divicon

PS10 x x x x x

PS20 x — — — x

Solar pump assembly

P10 x — — x x

P20 x — — — x

Brand	Viessmann
Model	Solar-Divicon PS10
Category	Water Pump
Language	English

Brand

Viessmann

Model

Solar-Divicon PS10

Viessmann Solar-Divicon PS10 - User Manual

Table of Contents

Summary

Safety Instructions

Safety Instructions Explained

Installation Information

Dimensions

Installing Locking Ring Fittings

Clearances

Fitting the Solar-Divicon

Electrical Connections

Mounting the Solar Circuit Pump Assembly

Flushing and Filling the Solar Thermal System

Replacing the Circulation Pump

Specification

Parts List for Solar-Divicon, type PS10

Parts list for solar pump assembly, type P10

Parts list for Solar-Divicon, type PS20

Parts list for solar pump assembly, type P20