27
Tecto FI2 84 PI
EN 428001335137
Use and maintenance manual
START-UP (ON)
Activate the mains system master switch.
Plug the appliance in the socket supplied by the customer, ensuring
that the plug is tted with an earth contact and that there are no
multiple sockets connected to it.
THE EQUIPMENT STARTS AUTOMATICALLY
NO
16. CONTROL PANEL
SWITCH OFF (OFF)
Remove the power plug from the socket
supplied by the customer.
ATTENTION
The electronic control unit is installed already
programmed; any changes to the control unit
setting can only be performed by qualied
technical personnel.
To Next Page
Loading...
