TRANSLATION OF THE ORIGINAL INSTRUCTIONS
8
Tecto FI2 84 PI
EN 428001335137
Use and maintenance manual
WARNING
The installers and users MUST read and understand the instructions
contained herein before any operation on the appliance.
STAFF TRAINING
The buyer is responsible for ensuring personnel who will use the appliance and
maintenance technical staff are instructed and trained adequately. The manufacturer
is available for advice, clarications, etc. so that the operator and technical staff can
use the appliance correctly. To ensure operator safety, appliance devices should be
kept in constant working order. This manual is intended to illustrate the use and
maintenance of the appliance.The operator has a responsibility and duty to carefully
observe the instructions contained within it.
Failure to comply with safety standards may result in injury to personnel and
damage to the equipment components and control unit. The user can contact the
dealer to request additional information not contained in this document, or suggest
improvements, at any time.
Before delivery to the customer, it is essential that the specialised technical
staff check that the equipment is working correctly to ensure maximum per-
formance is obtained
.
REFRIGERANT
R744
The refrigerant R744 is a gas that is compatible with the environment. Be very
careful when transporting and installing the appliance and during scrapping to
avoid damaging the refrigerant circuit pipes.
IN THE EVENT OF DAMAGE:
Keep ames or sources of ignition away from the appliance. Properly ventilate
the premises for a few minutes. Turn the unit off, pull out the plug. Notify the
customer service department.
ATTENTION
The refrigerant system works at High Pressure. Do not tamper with
the system, but call a specialised and qualied technician before
disassembly.
ATTENTION
Maintenance must be performed by qualied personnel that has been to work
with ammable refrigerants.
To Next Page
Loading...
Need help?
General
