Additional Information
Viessmann Manufacturing Company Inc.
750 McMurray Road
Waterloo, Ontario • N2V 2G5 • Canada
Tel. (519) 885-6300 • Fax (519) 885-0887
www.viessmann.ca • info@viessmann.ca
Viessmann Manufacturing Company (U.S.) Inc.
45 Access Road
Warwick, Rhode Island • 02886 • USA
Tel. (401) 732-0667 • Fax (401) 732-0590
www.viessmann-us.com • info@viessmann-us.com
16
Start-up Maintenance/Service Maintenance/Service Maintenance/Service Maintenance/Service
on:
by:
Maintenance/Service Maintenance/Service Maintenance/Service Maintenance/Service Maintenance/Service
on:
by:
Before each heating season begins,
have the following service and
maintenance done by a licensed,
professional heating contractor:
1. Boiler heat exchanger inspected and
cleaned.
2. Vent s y s t em inspected for
deterioration, leaks, corrosion, proper
draft, and proper operation. Check
vent system f or compliance with
local and national code requirements.
Repair or replace as required.
3. Burner checked, and if necessary,
adjusted for proper combustion and
operation. Check for adequate supply
of fresh outside combustion and
ventilation air.
To operate boiler, please follow all inst ructions located in the
Operating Instructions and User’s Information Manual of
the Power Burner and t he Boiler Control
Maintenance Record
5167 405 v2.2
Technical information subject to change without notice.
Printed on environmentally friendl y
(recycled and recyclable) paper.
Neglecting to perform necessary
maintenance can cause unsafe
operation.
WARNING
Operating Instructions
To Previous Page
Loading...
Need help?
General