Viessmann VB2 Series Start-Up/Service Instructions

Safety
5
Important Regulatory and Installation Requirements
Instructing the system user
The installer of the system is
responsible to ensure the system
operator/ultimate owner is made
familiar with the system functioning, its
activation, its shut-down, and the need
for periodic service.
Initial start-up
Initial start-up must be performed by a
qualified heating contractor; v alues and
calibrations specified in the burner test
sheet are to be v erified at this time.
Completion of the Maintenance Record
by the heating contractor is also
required.
The following topics must be covered:
Proper syst em operation sequence.
Explain the equipment as well as the
need for combustion air.
Demonstrate an emergency
shut-down, what to do and what not.
Explain that there is no substitute for
proper maintenance to help ensure
safe operation.
Workingontheequipment
The installation, adjustment, service,
and maintenance of this boiler must be
done by a licensed professional heating
contractor who is qualified and
experienced in the installation, service,
and maintenance of hot water boilers.
There are no user serviceable parts on
the boiler, burner, or control.
Ensure main power supply to
equipment, the heating system, and all
external controls has been deactivated.
Close main oil or gas supply valve. Take
precautions in both instances to avoid
accidental activation of power during
service work.
Please carefully read this manual prior
to attempting s tart-up, maintenance
or serv ice. Any warranty is null and
void if these instructions are not
followed.
For information regarding other
Viessmann System Technology
componentry, please reference
documentation of the respective
product.
We offer frequent installation and
service seminars t o familiarize our
partners with our products. Please
inquire.
Technical literature
Literature applicable to all aspects of
the Vitola:
- Technical Data Manual
- Installation Instructions
- Start-up/Service Instructions
- Installation codes mentioned
in this manual
Leave all literature at the installation
site and advi se the system
operator/ultimate owner where the
literature can be found. Contact
Viessmann for additional copies.
5167 405 v2.2

Viessmann VB2 Series Specifications

General

Brand	Viessmann
Model	VB2 Series
Category	Boiler
Language	English