Viessmann VITOCELL 100-V - Thermal Insulation (500 to 950 L); Fitting the Thermal Insulation Jacket

13
Fitting the thermal insulation jacket
1.
6x
2.
6x
4.
6x
3.
6x
Fig. 10
Note
■
Ensure that no fleece remnants enter the DHW cylin-
der through the cylinder connections.
■
This work requires 2 people.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket and place it around the
cylinder body.
Note
Leave the clip fasteners in the first notch.
2. At the front of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket.
3. Push the clip fasteners at the back of the cylinder
as close together as possible.
4. Push the clip fasteners at the front of the cylinder
as close together as possible.
Thermal insulation (500 to 950 l)
5813557