Viessmann VITOCELL 100-V - Page 9

9
Siting the DHW cylinder with immersion heater (300 l)
a
Fig. 5
Immersion heater installation instructions
Note
Maintain the minimum clearance.
Note
The unheated length of any threaded immersion
heater installed on site must be at least 100 mm.
The threaded immersion heater must be suitable for
installation in enamelled DHW cylinders.
Cylinder capacity Output of im-
mersion
heater
Dim. a
in mm
300 l 6 kW min. 685
Siting the DHW cylinder with heating lance (300 l)
585
Fig. 6
Preparing for installation
Siting information (cont.)
6150608
Installation