Viessmann Vitodens 100-W WB1B Series Installation Instructions

1
Installation Instructions
Rigid Pipe Venting Systems
5368 815 v3.4 05/2012
for use by heating contractor
for Vitodens 100-W WB1B Series
and Vitodens 200-W WB2B Series
Vitodens 100-W, WB1B and
Vitodens 200-W WB2B Series
(with preinstalled coaxial vent pipe adaptor)
Read and save these instructions
for future reference.
IMPORTANT
Please file in service binder

Viessmann Vitodens 100-W WB1B Series Specifications

General

Heat Exchanger Material	Stainless steel
Type	Wall-mounted condensing boiler
Efficiency	Up to 98%
Fuel	Natural gas or LPG
Modulation Range	1:6
Flue Gas Connection	60/100 mm
NOx Emissions	Less than 40 mg/kWh
Warranty	5 years
Water Pressure	Max. 3 bar