Call up code 1
1. Press K and L simultaneously
for approx. 2 se conds.
2. Selecttherequiredcodingaddress
with a or b; the ad dress flash es.
Confirm with d; the value flashes.
Note
Codes are displayed in plain text
on weather-compensated control
units. Codes , wh ich are not rel e-
vant becaus e of the equi pment
level of your heating system or
because of setti ngs of other codes,
will not be d isplayed.
3. Change this value with a and b;
confirm with d. The disp lay briefly
shows "adopted", then the address
flashes again. Select additional
addresses (if required) with a
or b.
4. Press K and L simultaneously
for approx. 1 se cond.
Coding is terminated.
Code 1
40
Coding
5692 537 GB
To Next Page
Loading...
