5. Hook burner B into burner retai-
ner A or position on a suitable
surface.
6. Check for heat exchanger contami-
nation. (If contaminated, continue
with the following chapter).
Cleaning the heating surfaces
!
Please note
To prevent damage to the heat-
ing surfaces,
only clean with the implements
supplied as part of the optional
cleaning set.
1. Pull condensate drain hose C
from the neutralising system and
lead it into a suitable vessel.
Further details regarding the individual steps (cont.)
22
Initial start-up, inspection, maintenance
5692 536 GB
To Next Page
Loading...
