Calling up code 1
1. Press K and L simultaneously
for approx. 2 s.
2. Select the required coding address
with a or b; the address flashes.
Confirm with d; the value flashes.
Note
Codes are displayed as plain text.
Codes, which are irrelevant (due to
the system equipment level or the
setting of other codes) will not be
displayed.
3. Change the value with a or b;
confirm with d. The display briefly
shows "Accepted", then the
address flashes again. Any
address may be selected with a
or b.
4. Press K and L simultaneously
for approx. 1 s.
Encoding has been terminated.
To Next Page
Loading...
