16
In between these time phases the system heats to a
reduced temperature ("Reduced").
Setting the time program effectively
If you would like to set a different time program for just
one day of the week, proceed as follows.
Example: You want to set the same time program
for every day except Monday:
1. Select the period "MondayāSunday" and set the
time program.
Note
The tick is always set at the sections of the week
with identical time phases.
2. Then select "Monday" and adjust the time pro-
gram for that day.
Deleting time phases
Set the time for the end point to the same time that
was set for the start point.
The display shows the selected time phase as
"- - : - -".
Operating the remote control
Time program (cont.)
5839324
To Next Page
Loading...
