9
Vitotrol 200-E
Wired remote control for connecting to Viessmann
heat generators
For setting up to 4 heating circuits:
■
Up to 3 set room temperatures (Comfort, Normal,
Reduced) can be set
■
Set DHW temperature can be adjusted
■
Holiday program and "Holidays at home" function
■
Time programs for heating circuits and DHW cylinder
■
Comfort function
■
Illuminated graphic display
Permissible ambient temperatures in the installation room
Min. Max.
Permissible ambient temperature 0 °C 40 °C
Commissioning
Your remote control is connected to the control unit of
the heat generator. Commissioning and adjusting the
control unit to the local conditions and building charac-
teristics must be carried out by your contractor. The
contractor must also provide instructions on how to
operate the system.
During commissioning, the control unit settings are
transferred to the remote control.
Your system has been pre-set
The control unit is preset at the factory.
Operating instructions for heat generator control
unit
The functions and displays on your remote control
depend on the control unit it is connected to as well as
the control unit settings and the equipment level of the
system as a whole.
Your contractor can make further adjustments for you
during commissioning.
You can change the settings at any time to suit your
individual requirements.
Winter/summertime changeover
This changeover is automatic.
Power failure
All settings are saved if there is a power failure.
If the system has been shut down for a prolonged
period, reset the date and time on the heat generator
control unit.
Operating instructions for heat generator control
unit
Introductory information
Product information
5839324
To Next Page
Loading...
