ViewSat VSPRO - Recording and Playback Operations; Time Shift, Quick Record, and Reservation

`
9
. HOW TO RECORD
&
PLAYBA
CK
9
.
1.
TIME SHIFT
9.2. QUICK RECORD
* Note: If recording time is less than 30 seconds, the event will not be saved. This is to
avoid the unexpected start of recording.
There are 2 ways for
Reservation Record.
O
ne is the
manual recording by setting
the
date, time, and duration of the event in the Timer. The other is a recording from the
Program Guide.
For reservation record, the current time of your receiver should be set exactly same as
your local time or the satellite time. You must have synchronized the reservation’s time
and your local time. (Please refer to the 7.3.2. TIME SETTING).
Select
Timer List
menu
in
Preferences
menu.
Set and check all recording schedule.
Push OK key on your selection No. in
Timer List. Then Edit or add reservation
table in the following screen.
9
.3.1. Reservation record in Timer List
9
.2.1.
Quick Record
Push the key. And the current channel
will be recorded. If you want to stop the
record, push the key.
The recorded program can be found in the
Recorded Program in Record menu.
Key will also guide you to the list of the
recorded program. (Refer to 7.4.1 Recorded
program).
During recording, push the key on the
recording channel once more to select the
duration of recording.
(Option : Manual, Current, Current & Next)
1
)
Push the
key, Time shift will be started on the live channel
(freeze live channel).
2) Push key for playback.
3) For slow motion playback, push key.
4) For Rewind, push key. For forward, push key.
5) To return to the present time for live, push key.
9
.2.2. Two
Record
s
While recording one channel, the
second channel can be recorded
simultaneously.
Press key on another channel
which you want to record.
You can check the status of recordings
with the Recording Icon numbered as 1
or 2 in the information Box.
You can change into the recording
channels by using the color keys in the
Information Box.
You can also the
record PIP channel after moving to PIP mode by using the color key.
Press key on the PIP channel for recording. Recording Icon will be added on the
Information
Box.
So, you can record PIP and Main channel at the same time.
If you
have
to
walk away from your
TV but
do not want to miss the show, you can
make a live channel pause for a while with
the Time Shift function.
Simply push the key, then you will
be able to watch the event from the time it
was pause when you are back to TV.
(Caution! Channel change erases the
recorded program.)
HOW TO RECORD
HOW TO RECORDHOW TO RECORD
HOW TO RECORD &
& &
& PLAYBACK
PLAYBACK PLAYBACK
PLAYBACK
37 38
9.3. RESERVATION RECORD
:
Total recording time, you can adjust the duration
manually
.
: Only current program will be recorded.
: The current and next program will be recorded.
M
anual duration
Record current
Record current &
next