45
Function Description
Presentation
Timer
See "Setting the presentation timer" on page 29 for details.
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 19 for details.
Projector
Position
See "Choosing a location" on page 9 for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Operation
Settings
Direct Power On
Selecting On allows the projector to turn on automatically
once the power is fed through the power cord.
Signal Power On
Sets whether the projector automatically turns on when the it
is in standby mode and detects a VGA signal or a HDMI
signal with 5V power.
Auto Power Off
Allows the projector to turn off automatically if no input
signal is detected after a set period of time to prevent
unnecessary waste of light source life.
Blank Timer
See "Hiding the image" on page 30 for details.
Sleep Timer
See "Setting Sleep Timer" on page 50 for details.
Reset Filter Timer
See "Resetting the filter timer" on page 49 for details.
Panel Key Lock See "Locking control keys" on page 30 for details.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
4. SYSTEM SETUP: Basic menu
To Next Page
Loading...
