46
Function Description
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in
a high altitude environment" on page 30 for details.
Audio Settings See "Adjusting the sound" on page 38 for details.
Light Source
Settings
See "Setting Light Source Settings" on page 50 for details.
Security
Settings
See "Utilizing the password function" on page 20 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so
that you can connect the projector using a suitable RS232
cable and control the projector with RS232 commands.
Closed Caption
Selects a preferred closed captioning mode when the selected
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video
input signal is selected and its system format is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Standby
Settings
See "Using the projector in standby mode" on page 38 for
details.
LAN Control
Settings
Wired LAN
See "Controlling the projector through a LAN environment"
on page 31 for details.
AMX Device Discovery
When this function is On, the projector can be detected by
AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone,
Projector Position, High Altitude Mode, Security Settings,
Baud Rate, LAN Control Settings.
5. SYSTEM SETUP: Advanced menu
To Next Page
Loading...
