ViewSonic LS810 - Device Operation and Control; Projector Controls

6
Device control and functions
projector
1. (MYBUTTON)
Allows the user to dene buttons and hotkeys. These functions can be set using the
OSD menu.
2. STATUS LED
3.
/ / / (KeystoneCorrectionbuttons)
Manually corrects distorted images resulting from an angled projection.
Left/Right/Up/Down
Selects the required menu item to make adjustments.
4. POWER LED
5.
(POWER)
Toggles the projector between standby mode and Power ON.
6. MENU/EXIT
Open the OSD menu.
7. ENTER
Enacts the selected On-Screen Display (OSD) menu item.
Displays the Corner Adj. page.
8. SOURCE
Shows the Source Selection Bar.