ViewSonic LS810 - Connecting Devices

14
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all devices off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are rmly inserted.
Intheconnectionsshownbelow,somecablesmaynotbeincludedwithintheprojector
packaging(pleasereferto“Shipping contents”).
You may purchase the required signal cables from an electronics store.
The following links and icons are for references only. Connection jacks at the back of the
projectors may differ according to the projector model.
Display
AV Device
Notebook or
desktop
computer
Speakers
Microphone
(VGA) or
or
(DVI)
1. Computer In
2. Computer Out
3. Mini USB
4. Component
5. S-Video
6. Video
7. Audio
8. HDMI + USB 5V/2A Out
9. HDMI + Micro USB
10. MHL